| | | WT600-2J 속도조절형 튜브연동식 정량펌프 |
| [WT600-2J Basic Peristaltic Tubing Pump] |
| | |
|
|
|
|
개 요 | | WT600-2J 기본형 튜브연동식 액체 정량펌프는 브러쉬리스(BLDC) 모터를 장착하여 강력한 회전력(토크)와 낮은 진동, 높은 효율성과 우수한 수명을 제공한다. | | YJ15, YJ25, YZII15, YZII25, BZ25, KZ25, DMD25, DG15-24 펌프헤드 2 개를 동시에 장착할 수 있으며, 채널당 4.2~6000 mL/min 유량범위에서 이송할 수 있다. | | 펌프의 회전속도를 조정하고 회전방향을 바꿀 수 있으며, 유체를 교환하거나 세척하기 위해 프라임 버튼을 이용하여 펌프의 최대회전속도로 가동시킬 수 있다. | | 외부제어에 의해 펌프의 회전수(rpm)를 조정할 수 있으며, 작동 파라메터는 자동으로 저장된다. | | 조작이 간편하다. |
|
|
|
|
|
규 격 | Speed | : | 60~600 rpm, CW/CCW | Speed resolution | : | 1 rpm | Speed accuracy | : | <±1% | Control mode | : | Control panel, external signal control and communication control available | Display | : | 3-digit LED displays current speed | External control | : | Start/stop, cw/ccw control | | | Speed control; 4~20 mA, 0.5~5 V, 1~10 V, 1~10KHz
| Communacation inbterface | : | RS485 | Power-off memory | : | Return to previous state when power on | Prime | : | For fast filling and emptying at full speed | Power supply | : | AC220V±20%/50-60 Hz | Power consumption | : | 200W | Operating condition | : | Temperature; 0~40℃ | | | Relative humidity; <80% | Dimensions | : | 285 L x 207 W x 180 mmH | Weight | : | 5.2 kg | IP rating | : | IP31 |
|
|
|
주문정보 | Drive | Pump head | Tubing | Flowrates(mL/min) | Weight(kg) | WT600-2J (05.02.63A) | (1,2,3,4) x YZ-1515 | 13# 14# 19# 16# 25# 17# 18# | 4.2~2200/channel | 5.6~6.8 | (1,2,3,4) x YZ-II15 | (1,2,3,4) x YZ-2515 | 15# 24# | 100~1600/channel | (1,2,) x YZ-II25 | 15# 24# 35# 36# | 100~3000/channel | 5.6~6.0 | (1,2) x KZ25 | 200~6000/channel | 6.0~6.8 |
| YZ1515x, YZ2515x
| | YZII15, YZII25
| | DG15-24
| | KZ25
| |
| |
|
|
기술자료 | How to use Footswitch Function for WT600-2J (Release Time:2016-12-30) Connect Footswitch to External Control Port to control Start/Stop of pump.
Note: Footswitch is optional accessories. It can only control the start and stop of the pump. The speed and direction of the pump are controlled by the knob and switch on the operation penal. | How to use External Control Function for WT600-2J (Release Time:2016-12-30) Communication Control The pump can connect to control computer (computer, PLC, SCM) through RS485 serial communication module (shown as below).
Analog Single Input function Make the Remote Control Switch in “on” position. External Control Module is shown as below.
Terminals Definition Terminal 1 Analog input in 4 – 20 mA, 0.5 -5V, 1 – 10V external control module to control the speed of pump. Terminal 2 External control start/stop input. Open, the pump runs; Close, the pump stops. Terminal 3 External control direction input. Open, the pump runs clockwise; Close, the pumps runs counter clockwise. Terminal 4 COM of external control input.
Pulse Signal Input Function: Terminal 1 COM of external control input Terminal 2 External control start/stop input. Open, the pump runs; Close, the pump stops. Terminal 3 External control direction input. Open, the pump runs clockwise; Close, the pumps runs counter clockwise. Terminal 4 Pulse input in 1 – 10 kHz pulse external control module to control the speed of the pump. Terminal 5 COM of pulse input
|
|
|
|
귀하의 성공적인 연구개발의 동반자가 되겠습니다.
****************************************************************************************************
(주)동방하이테크상사
http://www.allpump.co.kr
서울시 성동구 광나루로6길 35 성수이비즈센터 710호
T)02-457-6292 F)457-6293 dbht@allpump.co.kr
****************************************************************************************************
정량펌프, 정밀펌프, 고압펌프, 마이크로펌프, OEM 펌프, HPLC 펌프, 피스톤펌프, 주사기펌프, 실린지펌프, 다이어프램펌프, 다이아프램펌프, 튜브펌프, 튜빙펌프, 호스펌프, 연동펌프, 기어펌프, 기아펌프, 플런져펌프, 부란자펌프, 초정밀펌프, 초미세펌프, 초고압펌프, 밸브, 피팅, 튜빙, 아답터, 크로마토그래피 제품, 연구실험기자재 등