최대규모 Longer 공식대리점
#정식수입 #공식인증 #펌프견적 #펌프문의 #견적문의 #동방하이테크상사 #024576292
 |
 |
 |
| FU4B-1 튜브연동펌프 분주기, 충전시스템 [FU4B-1 Dispensing & Filling Systesm] |
||
| 》 분 주 량 : 0.1~9,999 mL 》 분주시간 : 0.5~6,000 sec 》 분주간격 : 0.5~999 sec 》 분주회수 : 0~999,999 cycle 》 펌프헤드 : YZ15, YZ25, FG15, FG25, DMD15 |
||
◈개 요
|
》 튜브연동펌프를 사용하는 자동분주기, 충전시스템이다. |
 |
 |
| FU4B-1 | |
 |
 |
| FK1-100Z | |
◈특 징
| 》 One unit has 3, 4 or 5 channels. Max. 32 channels (8 units) are available 》 Control each channel separately. 》 Back suction function is available. 》 Avoid liquid drippage 》 Each channel is separate. 》 Control parts adopt inserting and drawing structure. 》 Easy to maintain 》 Flow rate calibration function for more accurate volume 》 Realize the function of filling stop without bottles 》 128×64 graphic LCD display and friendly interface 》 Computer control is available through RS485 communication. |
◈규 격
| 》 Dispensing volume | 0.1~9,999 mL (resolution; 0.01 mL) |
| 》 Dispensing time | 0.5~6,000 sec (resolution; 0.01 sec) |
| 》 Interval time | `0.5~999.9 sec |
| 》 Dispensing cycle | 1~999,999 times, "0" means unlimited cycle |
| 》 Delay time before back suction | 0~60.0 sec |
| 》 Back suction angle |
0~1,000o |
| 》 Channel |
4-channel/unit, max.32-channel |
| 》 Display |
LCD |
| 》 Control mode |
Off-line(FC32S-1 controller), |
| 》 Start/stop signal input |
1 switch signal for each dispensing unit |
| 》 No bottle signal input |
4 switch signal corresponding to 4 cahnnels for each dispensing unit |
| 》 Communacation interface |
RS485 communication interface, Modbus protocol, communication parameters (address, baud rate, parity, stop bit) can be set through touch screen |
| 》 Dispensing calibration |
Dispensing volume of every channel can be calibtate throurg percentage, colume, wright or average weight method |
| 》 Channel enable |
Every channel can be set as enable or disable |
| 》 Fill/backflow |
All channels can be fast filling or backflowing at high speed |
| 》 Channel address |
Communication address of each channel can be set throughmebbrane key and display on independent LED |
| 》 Password function |
Protect the system parameters and prevent misoperation through the password |
| 》 Dispensing parameter set |
Dispensing parameters can be saved as a parameter set which can be invoked easily without reset it |
| 》 Dimension | Dispensing unit (4-channel); 663 mmL x 218 mmW x 177 mmH Controller; 228 mmL x 60 mmW x 146 mmH |
| 》 Power supply | Dispensing unit (4-channel); AC220V±20%/300 Watt Controller; AC 90-260V/10 Watt |
| 》 Weight | Dispensing unit (4-channel); 12.13 kg Controller; 1.69 kg |
| 》 IP rating | IP31 |
◈주문정보
|
Drive |
Pump head |
Tubing |
Dispensing |
Dispensing |
Dispensing |
Precision |
Productivity |
|
FU4B-1 FC32S-1 |
YZ-1515 |
13# |
≤0.5 |
0.3-0.5 |
1-1.2 |
≤2% |
27-30 |
|
14# |
≤1.0 |
1.0-2.3 |
|||||
|
19# |
≤1.5 |
2.6-5.1 |
|||||
|
16# |
≤2.0 |
4.6-9.1 |
|||||
|
25# |
≤3.0 |
10-19 |
|||||
|
17# |
≤3.0 |
15-30 |
|||||
|
YZ-II15 |
15# |
≤3.0 |
8.0-17 |
||||
|
24# |
≤3.0 |
12-24 |
|||||
|
35# |
≤3.0 |
18-36 |
|||||
|
36# |
≤3.0 |
25-48 |
|||||
|
DMD15-28 |
13# |
≤0.5 |
0.1-0.9 |
||||
|
14# |
≤1.0 |
0.2-2.3 |
|||||
|
19# |
≤2.0 |
0.5-5.9 |
|||||
|
16# |
≤3.0 |
2.0-10 |
|||||
|
25# |
≤3.0 |
5.0-25 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
|
◈기술자료
 FK1-100Z 펌프 교정 |
 FK1-100Z 펌프 분주량 조작 |
귀하의 성공적인 연구개발의 동반자가 되겠습니다.
***************************************************************************************
동방하이테크상사
http://www.allpump.co.kr
서울시 성동구 광나루로6길 35, 성수이비즈센터 710호
T)02-457-6292 F)457-6293 dbht@allpump.co.kr
***************************************************************************************
정량펌프, 정밀펌프, 고압펌프, 마이크로펌프, OEM 펌프, HPLC 펌프, 피스톤펌프, 주사기펌프, 실린지펌프, 다이어프램펌프, 다이아프램펌프, 튜브펌프, 튜빙펌프, 호스펌프, 연동펌프, 기어펌프, 기아펌프, 플런져펌프, 부란자펌프, 초정밀펌프, 초미세펌프, 초고압펌프, 밸브, 피팅, 튜빙, 아답터, 크로마토그래피 제품, 연구실험기자재 등
동방하이테크를 찾아주셔서 감사합니다.
www.allpump.co.kr
