최고의 고압피스톤 정량펌프, 동방하이테크상사
#고압피스톤펌프견적 #정량펌프문의 #펌프견적문의 #액체크로마토그래피 #동방하이테크상사 #024576292
튜브연동펌프 부속품 [Peristaltic Pump Accessories] |
|
Dispensing Controller Foot Switch External Control Module |
카탈로그
주문정보
Dispensing Controller | |||||
|
|||||
Dispensing time | 0-99.99S | ||||
Pause time | 0-99.99S | ||||
Time resolution | 0.01S | ||||
Work mode | Single or multiple | ||||
Internal count range | 0-999, count up or count down | ||||
External count range | 999999,0 means unlimited cycle | ||||
External Start/Stop | Open circuit | ||||
Memory function | Repower the pump, user can choose whether to continue in accordance with the state before the power-down | ||||
Power supply | AC 220V/5W | ||||
Type | Product code | Function | |||
FK-1C | 05.49.25A | Dispensing controller can be equipped with many peristaltic pumps, gear pumps to realize dispensing automatically. |
Foot Switch | ||||
|
||||
Type | Product code | Connector | Applicable | Function |
JK-1 | 05.49.20A | DB-9 | Peristaltic Pumps | Gated: Pump stops when it is powered on. Pump runs when press down the footswitch; and pump stops when release the footswitch. Trigger: Pump stops when it is powered on. Pump runs when footswitch is pressed once, and pump will stop when footswitch is pressed again. |
JK-2 | 05.49.20B | DB-9 | Dispensing Controller | Trigger: Pump stops when it is powered on. Pump runs when footswitch is pressed once, and pump will stop when footswitch is pressed again. |
JK-3 | 05.49.20C | DB-15 | Peristaltic Pumps | Gated: Pump stops when it is powered on. Pump runs when press down the footswitch; and pump stops when release the footswitch. |
JK-4 | 05.49.20D | DB-9 | LSP Syringe Pumps | Gated: Pump stops when it is powered on. Pump runs when press down the footswitch; and pump stops when release the footswitch. Trigger: Pump stops when it is powered on. Pump runs when footswitch is pressed once, and pump will stop when footswitch is pressed again. |
JK-5 | 05.49.20E | DB-15 | TJ Syringe Pumps | Trigger: Pump stops when it is powered on. Pump runs when footswitch is pressed once (press down and release), and pump will stop when footswitch is pressed again. |
JK-6 | 05.49.20F | None | TS Syringe Pumps | Trigger: Pump stops when it is powered on. Pump runs when footswitch is pressed once (press down and release), and pump will stop when footswitch is pressed again. |
JK-8 | 05.49.20H | 9-pin | YT600-1J | |
JK-9 | 05.49.20I | 9-pin | WT600-3J | |
JK-10 | 05.49.20J | 9-pin | WT600-4F | |
JK-11 | 05.49.20K | DB-15 | Peristaltic Pumps | |
JK-12 | 05.49.20L | DB-9 | Peristaltic Pumps | |
JK-13 | 05.49.20M | None | FK-100Z | |
JK-14 | 05.49.20N | BNC | LLP01-100 | |
External Control Interface | |||
|
|||
Type | Product code | Connector | |
0~5 V | 05.49.31A | DB-15 | BQ50-1J, WT3000-1JA, BT100-2J, BT100-1F, WT3000-1FA, BT300-2J, BT300-1F, WT3000-1JB, BT600-2J, WT600-2J, WT3000-1FB, WT600-1F |
0~10 V | 05.49.31B | DB-15 | |
4~20 mA | 05.49.31C | DB-15 | |
0~10 kHz | 05.49.31D | DB-15 | |
RS-485 | 05.49.31E | DB-15 | |
WK-01 | - | - | Change (4-20mA, 0-5V, 0-10V) on the basis of standard analog external control module on the increase in internal and external control conversion. |
Wk-02 | - | - | Switching control start and stop supporting OEM100J-75 |
WK-03 | - | - | Switching control start and stop supporting OEM100J-75 |
WK-04 | - | - | Switching control peristaltic pump (except aeronautical product plug interfaces) start and stop, stop short, disconnected operation |
WK-05 | - | - | Switching control peristaltic pump WT600-3J, WT600-4F start and stop |
WK-06 | - | - | Switching control start and stop, fault alarm output by the extraction module |
WK-07 | - | - | WK-04 module controls the start and stop logic is inverted; short run, stop off |
WK-08 | - | - | External control only controls the start and stop buttons control the speed of the internal control, 5V stopped, suspended the operation according to the original state |
WK-09 | - | - | External control only controls the start and stop buttons control the speed of the internal control, 24V stopped, suspended the operation according to the original state |
WK-10 | - | - | External control switch start and stop and direction control, speed control button internal, supporting BT100-2J-12 & YZ1515X |
WK-11 | - | - | Increase external control switch function on the basis of external control 0-10V |
WK-12 | - | - | And supporting the use of BT100-2J-18, DB15 connected to drive external control interface, DB9 pin 2 Take 0-10V negative, positive needle 5 then 0-10V |
WK-17 | - | - | Adaptation LSP02-1B-1, by switching control and direction of the pump start and stop. |
WK-18 | - | - | Supporting BT100-2J-21 |
WK-19 | - | - | Supporting the use TJ-3A-5, switch control, external control start and stop and direction control |
|
관련제품
귀하의 성공적인 연구개발의 동반자가 되겠습니다.
***************************************************************************************
동방하이테크상사
서울시 성동구 광나루로6길 35, 성수이비즈센터 710호
T)02-457-6292 F)457-6293 dbht@allpump.co.kr
***************************************************************************************
정량펌프, 정밀펌프, 고압펌프, 마이크로펌프, OEM 펌프, HPLC 펌프, 피스톤펌프, 주사기펌프, 실린지펌프, 다이어프램펌프, 다이아프램펌프, 튜브펌프, 튜빙펌프, 호스펌프, 연동펌프, 기어펌프, 기아펌프, 플런져펌프, 부란자펌프, 초정밀펌프, 초미세펌프, 초고압펌프, 밸브, 피팅, 튜빙, 아답터, 크로마토그래피 제품, 연구실험기자재 등
'브랜드별펌프 > LONGER' 카테고리의 다른 글
[LONGER] FK-1C 디스펜서 콘트롤러 (0) | 2021.10.28 |
---|---|
[LONGER] 외부제어인터페이스 (0) | 2021.10.28 |
[LONGER] 연동펌프 튜빙, 핏팅 (0) | 2021.10.28 |
[LONGER] SP 공업용 OEM 주사기펌프 (0) | 2021.10.28 |
[LONGER] MSP 공업용 OEM 주사기펌프 (0) | 2021.10.28 |