본문 바로가기

브랜드별펌프/LONGER

[LONGER] WT600-1F 분주형 튜브연동식 정밀 정량펌프

최고의 고압피스톤 정량펌프, 동방하이테크상사

#고압피스톤펌프견적 #정량펌프문의 #펌프견적문의 #액체크로마토그래피 #동방하이테크상사 #024576292

WT600-1F 분주형 튜브연동식 정밀 정량펌프
[WT600-1F Dispensing Peristaltic Tubing Pump]
LCD 디스플레이와 멤브레인 키패드 및 회전식 엔코더스위치, IP31
회전속도 : 10~600 rpm (1 rpm), 역회전, 높은 회전력
유량범위 : 0.7~6000 mL/min
펌프헤드 : YZ15, YZ25, DG15-24, DMD15, KZ25 (최대 4 헤드 장착)


카탈로그

2019-2020+English_peri-lab_dbht200527.vol1.egg
10.00MB
2019-2020+English_peri-lab_dbht200527.vol2.egg
10.00MB
2019-2020+English_peri-lab_dbht200527.vol3.egg
10.00MB
2019-2020+English_peri-lab_dbht200527.vol4.egg
1.56MB


메뉴얼

manual_wt600-4f.pdf
7.72MB


개요

  • WT600-4F 공업용 튜브연동식 정량펌프는 강력한 회전력(토크)을 가진 BLDC모터를 장착하고 있으며, YZ35-13 또는 KZ35 펌프헤드를 2 개까지 장착할 수 있다.
  • 채널당 100 mL/min ~ 11 Liter/min 범위에서 유량조절이 가능하며, 100 mL ~ 999 Liter 의 분주량을 설정할 수 있다.
  • 멤브레인 키패드를 통해 작동메뉴를 설정하고, 대형 128x32 LCD 디스플레이를 통해 작동메뉴와 펌프의 작동상채를 간편하게 확인할 수 있으며, 검량기능에 의해 더욱 정밀한 유량제어가 가능하다
  • 표준 아날로그 인터페이스나 RS-485 통신 인터페이스를 통해 간편하게 원격제어할 수 있다.
  • 높은 외함보호등급(International Protection)이 IP65로 전원 및 움직이는 부위에 대해 완전하게 보호되며, 노즐로부터 품어져 나오는 물이 어느 방향으로 품어져 나와도 해로운 영향을 주지 않는다.
  • 안정된 유량과 낮은소음, 간편한 조작법으로 높은 압력과 신속한 유체이송을 요하는 공업전반에 적용할 수 있다.

특징

  • Suitable for laboratory, analytical instrument, industry.
  • Industrial peristaltic pump WT600-4F is a kind of dispensing pump with high IP rating, which is especially suitable for severe environment. With DC brushless motor, the pump could drive YZ35-13 and KZ35 pump head to provide a high flow rate from 100mL/min to 11000mL/min. The LCD could display the parameters and running state. The pump could run continuously at desired flow rate and speed, and also could complete the dispensing function at desired dispensing volume, dispensing time and batch cycles. The flow rate calibration and dispensing calibration ensure the high accuracy and precision. And the dispensing volume is 100mL-999L. The pump could be controlled through control panel, external control interface and RS485 communication interface.
  • Applicable Pump Head: YZ35-13, KZ35
  • Back suction: Prevent dripping of liquid when dispensing a certain liquid volume
  • Operating code: Membrane keypad to set parameters and operation
  • Control mode: Pump can be controlled internally through membrane keypand or externally through external control modules.
  • Prime function: Fast filling or emptying at full speed
  • Power-off function: Return to previous state when power on
  • Calibration: The flow rates and dispensing volume can be calibrated to improve the accuracy.
  • Footswitch: Control Start/Stop of the pump.
  • High IP rating: suitable for severe environment.
  • Dispensing function: dispense the fluid at desired volume, dispensing time and batch cycles.

규격

Speed 10~600 rpm, CW/CCW
Speed resolution 1 rpm
Control mode Control panel, external signal control and cmmunication control available
Display LCD for running status
Working mode Flowrate mode and Dispensing mode
Flowrate calibration Improve accuracy
Dispensing volume 100 mL ~ 999 Liter
Dispensing calibration Improve accuracy
Copy number 0~9999 times, ‘0’ means unlimited cycles
Pause time 0.1 sec ~ 99.9 min, resolution; 0.1 sec
Back suction time 0~9.9 circle, resolution; 0.1 circle
External control Start/stop, cw/ccw control
Direction, speed control 0-5V, 0-10V, 4-20 mA, 0-10kHz, external control module optional
Speed output 125 Hz ~ 7.5 kHz corresponding to 10~600 rpm
Start/Stop output OC gate signal
Direction output OC gate signal
Communacation interface RS485
Power-off memory Return to previous state when power on
Prime For fast filling and emptying at full speed
Power supply AC220V±20%/50-60Hz
Power consumption ≤300W
Operating condition Temperature; 0~40℃, Relative humidity; <80%
Dimensions 360 L x 215 W x 243 mmH
Weight 12 kg
IP rating IP65

주문정보

Drive Pump head Tubing Flowrates (mL/min) Weight (kg)
WT600-4F
(05.02.66)
(1,2) x KZ35-13 73# 82# 100~11,000/channel 15.7~19.4
(1,2) x YZ35-13 13.6~15.3

 

(좌)KZ35 (우)YZ35-13


관련제품

귀하의 성공적인 연구개발의 동반자가 되겠습니다.

***************************************************************************************

동방하이테크상사

http://www.allpump.co.kr

서울시 성동구 광나루로6길 35, 성수이비즈센터 710호

 

 

T)02-457-6292 F)457-6293 dbht@allpump.co.kr

***************************************************************************************

정량펌프, 정밀펌프, 고압펌프, 마이크로펌프, OEM 펌프, HPLC 펌프, 피스톤펌프, 주사기펌프, 실린지펌프, 다이어프램펌프, 다이아프램펌프, 튜브펌프, 튜빙펌프, 호스펌프, 연동펌프, 기어펌프, 기아펌프, 플런져펌프, 부란자펌프, 초정밀펌프, 초미세펌프, 초고압펌프, 밸브, 피팅, 튜빙, 아답터, 크로마토그래피 제품, 연구실험기자재 등