[LONGER] - FK-1C 디스펜서 콘트롤러

FK-1C 디스펜서 콘트롤러
FK-1C Dispensing Controller

	LONGER
	Dispensing time : 0-99.99S Pause time :0-99.99S Time resolution : 0.01S Work mode : Single or multiple

 

1.주문정보

Dispensing Controller
​ ​
Dispensing time			0-99.99S
Pause time			0-99.99S
Time resolution			0.01S
Work mode			Single or multiple
Internal count range			0-999, count up or count down
External count range			999999，0 means unlimited cycle
External Start/Stop			Open circuit
Memory function			Repower the pump, user can choose whether to continue in accordance with the state before the power-down
Power supply			AC 220V/5W
Type		Product code		Function
FK-1C		05.49.25A		Dispensing controller can be equipped with many peristaltic pumps, gear pumps to realize dispensing automatically.

Foot Switch
​
Type	Product code	Connector	Applicable	Function
JK-1	05.49.20A	DB-9	Peristaltic Pumps	Gated: Pump stops when it is powered on. Pump runs when press down the footswitch; and pump stops when release the footswitch. Trigger: Pump stops when it is powered on. Pump runs when footswitch is pressed once, and pump will stop when footswitch is pressed again.
JK-2	05.49.20B	DB-9	Dispensing Controller	Trigger: Pump stops when it is powered on. Pump runs when footswitch is pressed once, and pump will stop when footswitch is pressed again.
JK-3	05.49.20C	DB-15	Peristaltic Pumps	Gated: Pump stops when it is powered on. Pump runs when press down the footswitch; and pump stops when release the footswitch.
JK-4	05.49.20D	DB-9	LSP Syringe Pumps	Gated: Pump stops when it is powered on. Pump runs when press down the footswitch; and pump stops when release the footswitch. Trigger: Pump stops when it is powered on. Pump runs when footswitch is pressed once, and pump will stop when footswitch is pressed again.
JK-5	05.49.20E	DB-15	TJ Syringe Pumps	Trigger: Pump stops when it is powered on. Pump runs when footswitch is pressed once (press down and release), and pump will stop when footswitch is pressed again.
JK-6	05.49.20F	None	TS Syringe Pumps	Trigger: Pump stops when it is powered on. Pump runs when footswitch is pressed once (press down and release), and pump will stop when footswitch is pressed again.
JK-8	05.49.20H	9-pin	YT600-1J	​
JK-9	05.49.20I	9-pin	WT600-3J	​
JK-10	05.49.20J	9-pin	WT600-4F	​
JK-11	05.49.20K	DB-15	Peristaltic Pumps	​
JK-12	05.49.20L	DB-9	Peristaltic Pumps	​
JK-13	05.49.20M	None	FK-100Z	​
JK-14	05.49.20N	BNC	LLP01-100	​

External Control Interface
​ ​
Type	Product code	Connector	​
0~5 V	05.49.31A	DB-15	BQ50-1J, WT3000-1JA, BT100-2J, BT100-1F, WT3000-1FA, BT300-2J, BT300-1F, WT3000-1JB, BT600-2J, WT600-2J, WT3000-1FB, WT600-1F
0~10 V	05.49.31B	DB-15
4~20 mA	05.49.31C	DB-15
0~10 kHz	05.49.31D	DB-15
RS-485	05.49.31E	DB-15
WK-01	-	-	Change (4-20mA, 0-5V, 0-10V) on the basis of standard analog external control module on the increase in internal and external control conversion.
Wk-02	-	-	Switching control start and stop supporting OEM100J-75
WK-03	-	-	Switching control start and stop supporting OEM100J-75
WK-04	-	-	Switching control peristaltic pump (except aeronautical product plug interfaces) start and stop, stop short, disconnected operation
WK-05	-	-	Switching control peristaltic pump WT600-3J, WT600-4F start and stop
WK-06	-	-	Switching control start and stop, fault alarm output by the extraction module
WK-07	-	-	WK-04 module controls the start and stop logic is inverted; short run, stop off
WK-08	-	-	External control only controls the start and stop buttons control the speed of the internal control, 5V stopped, suspended the operation according to the original state
WK-09	-	-	External control only controls the start and stop buttons control the speed of the internal control, 24V stopped, suspended the operation according to the original state
WK-10	-	-	External control switch start and stop and direction control, speed control button internal, supporting BT100-2J-12 & YZ1515X
WK-11	-	-	Increase external control switch function on the basis of external control 0-10V
WK-12	-	-	And supporting the use of BT100-2J-18, DB15 connected to drive external control interface, DB9 pin 2 Take 0-10V negative, positive needle 5 then 0-10V
WK-17	-	-	Adaptation LSP02-1B-1, by switching control and direction of the pump start and stop.
WK-18	-	-	Supporting BT100-2J-21
WK-19	-	-	Supporting the use TJ-3A-5, switch control, external control start and stop and direction control

---

2.관련제품

​ ​
연동펌프 튜빙, 핏팅 [Peristaltic Pump Tubing & Fitting]	외부제어인터페이스 External Control Interface	튜브연동펌프 부속품 [Peristaltic Pump Accessories]
Silicon Peristaltic Pump Tubing PharMed BPT Peristaltic Pump Tubing Norprene Chemical Peristaltic Pump Tubing Tygon R-3603 Peristaltic Pump Tubing Tygon F-4040 Peristaltic Pump Tubing Viton Peristaltic Pump Tubing Fluran F-5500 Peristaltic Pump Tubing Peristaltic Pump Tubing Peristaltic Pump Fitting	4-20mA 0-5V/0-10V 0~10 kHz RS-485	Dispensing Controller Foot Switch External Control Module

정량펌프, 정밀펌프, 고압펌프, 마이크로펌프, OEM 펌프, HPLC 펌프, 피스톤펌프, 주사기펌프, 실린지펌프, 다이어프램펌프, 다이아프램펌프, 튜브펌프, 튜빙펌프, 호스펌프, 연동펌프, 기어펌프, 기아펌프, 플런져펌프, 부란자펌프, 초정밀펌프, 초미세펌프, 초고압펌프, 밸브, 피팅, 튜빙, 아답터, 크로마토그래피 제품, 연구실험기자재 등