본문 바로가기

정밀정량펌프/정밀주사기펌프

SP1-C1 공업용 주사기펌프 [OEM Syringe Pump]  |  Longer


SP 공업용 OEM 주사기펌프

[SP Series Industrial OEM Syringe Pumps]

SP1-C1 공업용 OEM 1-채널 주사기펌프, 6000 step/60 mm stroke
SP4-D1 공업용 OEM 4-채널 주사기펌프, no valve
SP4-E1 공업용 OEM 4-채널 주사기펌프, with 3-way solenoid valve

 

  개 요

공업용 OEM 주사기펌프는 정밀하게 시료와 시약을 이송하는 액체충진 보조시스템 분야에 사용되며, 정밀한 분주가 필요한 공정 및 연속자동분주에 사용됩니다. 서비스가 간편한 양변위치환 액체펌프로써 높은 정밀도와 재현성을 제공합니다. 액체의 비압축율에 의해 주사기펌프는 표면장력, 점도, 습도, 정수압, 기압과 같은 액체 환경인요인으로부터 영향을 받지 않습니다.
공업용 OEM 주사기펌프는 표준높이 주사기펌프모듈로써 용량이 가장 큰 주사기를 사용하여 분주, 연쇄분주, 희석 등의 모든 표준 유체조작 기능을 발휘합니다. 공업용 OEM 주사기펌프는 유동안정성을 향상시키고 분주시간을 최대화하여 증가하여 유동세포분석기와 미세유체공학 분야에 이상적입니다. 각종 밸브와 주사기를 간단히 조합하여 독자적인 작동되는 주사기 드라이브 모듈입니다. 16 대의 펌프를 직렬연결(daisy-chain)하여 개별적으로 제어할 수 있습니다.
공업용 OEM 주사기펌프는 까다로운 분야의 요구조건을 만족시킬 수 있는 믿고 즉각적으로 사용할 수 있는 장치입니다. 고객의 기대에 부응하는 기술을 제공하므로써  개발 프로젝트에 소용되는 시간과 예산을 절약될 것입니다.

 

  특 징

나노리터 ~  밀리리터 범위의 대용량 분주
고농도 산, 염기 및 휘발성유기용매와 같은 강한 화학물질을 처리할 수 있는 비활성 유로
신속하게 대용량의 시료를 연속적으로 분주
밸브와 주사기 및 튜빙의 교체가 용이
한꺼번에 연속적으로 여러 곳에 분주
한 대가 분주할 때 다른 펌프는 흡입하도록 직렬연결(daisy-chain)하면 처리량 증대
높은 압력으로 흘러가는 유체에 시료를 주입할 수 있는 주사기펌프밸브
마이크로 유체분야에 일정한 유량제어
60 mm 스트로크 길이
≥6.8 kg (15 lbs)의 추진력
미세유체공학에 필요한 진정한 속도를 보장하는 스피드 펌웨어

작은 사이즈에 다양한 밸브와 주사기 장착

초정밀 스테퍼모터 (6,000 steps/60 mm stroke)
독립적으로 사용하거나 또는 직렬연결(daisy-chain)하여 사용
적용분야
  - 정밀유체 장비 - 의료진단 장비 - 디지털 인쇄장치
  -시료전처리 장비 - 의료치료 장비 - 대체에너지 장치
  - 생명과학 장비 - 분석기기 장비

 

 

  규 격

  + 확대한 그림보기 ->

SP1-C1
 

 SP4-D1
 

 SP4-E1
 

Accuracy

 ≤1% @ 100% stroke

Precision

≤0.5% @ 100% stroke

Stroke length

60 mm

Linear force

≥6.8 kg (15 lbs)

Step resolution

6000 step/stroke

1000 step/stroke

Syringe speed

1.2 ~1200 sec

2.5 ~2,000 sec

Linear speed

0.005 ~50 mm/sec

0.03 ~24 mm/sec

Control resolution

0.01 mm/step

0.06 mm/step

Drive mechanism

Ball screw drive

Synchronous belt

Syringe

50 uL ~ 25 mL

50 uL ~ 5.0 mL

Valve

3-port 120°

 no

3-port solenoid valve

Valve speed

≤280 ms

-

≤100 ms

Max. pressure

0.68 MPa

0.68 MPa

1.0 MPa

Wetted material

Borosilicate glass, PTFE, PEEK

Syringe fitting

1/4"-28 thread

Valve fitting

1/4"-28 thread

Signal input

2 TTL signal

Signal output

3 OC gate signal

Communication

RS-485 or RS-232

Baud rate

9600  or 38400 bps

Pump ID setting

BCD dial switch, 0 to E corresponding pump address 1-15

Pump parameter setting

DIP switch

Dimension

114Lx65Wx254mmH

140Lx167Wx261.5mmH

Controller weight

2.1 kg

2.4 kg

Power

DC 24V/1.5 Amp

 

  주문정보

Model

Code

Stroke

Resolution

Voltage

Current

Diemension

Weight

SP1-C1

05.03.25A

60 mm

6000 step/stroke

24VDC

≤1.5A

114x65x254

2.1

SP4-D1

05.03.26A

60 mm

1000 step/stroke

24V DC

≤1.5A

140x167x262

2.4

SP4-E1

05.03.27A

60 mm

1000 step/stroke

24V DC

≤1.5A

140x167x262

2.4

 

  기술자료

Industries Syringe Pump & Micro Piston Pump in Spectrometers (Release Time:2015-10-08)

 

Application Introduction:

Identifying the substance and confirming its chemical composition and relative content based on its spectrum is called spectrum analysis. Spectrum analysis has many advantages when compared with other analysis methods: such as its high sensitivity, better selectivity, fast and easy operation, strong anti-interference performance, high accuracy, which has been developed rapidly. The spectrometer, used for spectrum analysis, has become an important piece of equipment in laboratory analysis, it is widely used in air pollution, water pollution, food hygiene, metal industry, etc. Typically, a spectrometer consists of 5 components: a light source, a sample processing system, a wavelength selector, detector and a signal processing system. The sample processing system can precisely and automatically provide samples and reagents, and can promptly remove waste. This ensures accurate analysis results.

 

The Customer Requirements:

1. To ensure the accuracy of the spectrum analysis, the spectrometer always needs automatic sampling system to provide accurate samples and reagents with a stable flow rate. The sample and reagent flow rate can be changed according to the substance which needs to be detected, to eliminate disturbance during transfer. The sampling system should have good chemical and abrasion resistance.  

2. To ensure the high efficiency of the analysis, waste needs to be promptly removed.

3. For the shear-sensitive samples, the sampling system needs to protect the integrity of the sample and reduce damaging.

 

Longer Pump Solution:

1. Longer's Peristaltic Pumps can effectively seal tubing without the need for any valves. And the pumps have wide range of flow rate which can be precisely managed through the speed control. The increasing pump rotor quantity reduces the pulse and maintains the stability of the sample flow. When transferring the samples and reagents, the fluid only comes into contact with the bore of the tubing, this eliminates the contamination between the pump and fluids. By changing the tubing, pumps can transfer different corrosive and abrasive fluids without cross-contamination. Longer’s peristaltic pump has a variety of control methods, and can be integrated into the control system to complete the sampling and waste discharging function automatically. Because of the low shear and gentle pumping action, Longer’s peristaltic pump is ideal for the shear-sensitive substance transfer.

2. Longer's Industrial Syringe Pump is extremely precise for small volume transfers. The fluid only comes into contact with the bore of the syringe and the tubing system to eliminate the contamination between the pump and fluids.

3. Longer's micro piston pump is extremely precise and has an extended life (10 million cycles), making it ideal for the transfer of small volume samples/reagents, ensuring the sampling is accurate and reliable.

 

Customer Value:

1.High precision ensures the accurate sampling and the analysis result, and could help achieve automatic function of the diluting and preparation of the standard solution.
Longer high precision micro piston pump has excellent dispensing precision: CV of 100% dispensing volume<0.1%.
Dispensing precision of Longer industrial syringe pump CV<0.5%
Dispensing precision of Longer peristaltic pump CV<2%

2.Remove the waste in a timely fashion
Longer peristaltic pump has good self-priming capability and could develop a vacuum of -0.95Bar(g)
Longer peristaltic pump could run dry without any damage.
With the fixed speed peristaltic pump, the waste could be removed under a stable flow rate. With the variable speed peristaltic pump, the waste could be removed under variable flow rate based on the actual requirement.
Longer peristaltic pump could be remote controlled through RS485 interface or analog signal interface. So the pump can be integrated into the control system of the spectrometer to remove the waste in a timely fashion.

3.Suitable for abrasive liquid with particles or corrosive liquid transferring. 
Gentle pumping action of Longer peristaltic pump is ideal for the semisolids, heterogeneous mixtures and liquid with particles. When transferring the fluid, the fluid only contacts the bore of the tubing. By using the tubing with good abrasive resistance, the pump can be used to transfer the abrasive liquid. By using the tubing with good chemical resistance, the pump can be used to transfer the corrosive liquid.
Soft particle size<25%*ID (tubing inside diameter)
Hard particle size<5%*ID (tubing inside diameter)

4.Reduce the damaging and protect the integrity for the shear-sensitive samples.
The low shear, gentle pumping action of peristaltic pump ensures the substance will not be damaged.

5.High reliability and easy maintenance of the pump help reduce the cost
Longer peristaltic pump does not need the valves and seals when transferring the fluid, and can run dry without damage.
Longer high precision micro piston pump has no consumable parts during the millions of life time.
The only consumable material of peristaltic pump is tubing, and the only consumable material of industrial syringe pump is syringe. The tubing and syringe can be changed easily, which reduces the maintenance cost.

 

 

귀하의 성공적인 연구개발의 동반자가 되겠습니다.

***********************************************************************************************
(주)동방하이테크상사  
http://www.allpump.co.kr  
서울시 성동구 광나루로6길 35 성수이비즈센터 710호
T)02-457-6292  F)457-6293  dbht@allpump.co.kr
***********************************************************************************************
정량펌프, 정밀펌프, 고압펌프, 마이크로펌프, OEM 펌프, HPLC 펌프, 피스톤펌프, 주사기펌프,
실린지펌프, 다이어프램펌프, 다이아프램펌프, 튜브펌프, 튜빙펌프, 호스펌프, 연동펌프, 기어펌프,
기아펌프, 플런져펌프, 부란자펌프, 초정밀펌프, 초미세펌프, 초고압펌프, 밸브, 피팅, 튜빙, 아답터,
크로마토그래피 제품, 연구실험기자재 등