LSP02-2A 주입식 주사기펌프 [Infusion Syringe Pump] | Longer

LSP 주입식 정밀 주사기펌프 [LSP Infusion Syringe Pumps] LSP01-1A 주입형 1-채널 주사기펌프 LSP01-2A 주입형 1-채널 미세주사기펌프 LSP02-2A 주입형 2-채널 미세주사기펌프 LSP04-1A 주입형 4-채널 주사기펌프

개 요 LSP 주사기펌프는 설치와 작동이 간편하고 높은 정밀도와 신뢰성을 제공하는 실험실용 표준형 주사기펌프이다. 주입전용 제품으로 공급되며, 10 µL에서 60 mL 주사기를 장착할 수 있다. 대형 LCD 화면에서 회전스위치와 멤브레인키패드를 이용하여 파라메터의 설정을 간편하게 할 수 있다

특 징 Syringe Selection : The syringe can be selected in the manufacturer table which includes manufacturer,    material and size or input the inner diameter of the syringe barrel directly Easy to operate: Combining big screen LCD display with rotary coded switch and membrane keypad makes    the operation simple and prompt. Working Mode: Infusion Memory Function : 1. The parameters are saved in EEPROM.    The parameters don't need to be reset when power returns after an interruption 2. In flow rate mode, the pump remains running or stop according to the setting parameters when power returns     after an interruption Protection Function : The pump will stall and give an alarm when the drive structure of the pump is blocked Communication Function : Realize computer control through RS485 communication interface Calibration Function : Acquire accurate volume through calibration: Input/output control Syringe Protection : Adjust syringe rest to prevent syringe from damaging

규 격  + 확대한 그림보기-> LSP01-1A LSP01-2A LSP02-2A LSP04-1A Working Mode Infusion Channel 1 2 4 Syringe 10 uL ~ 60 mL 10 uL ~ 10 mL Stroke 140 mm Pusher Advance 0.156 um/step 0.03125 um/step 0.156 um/step Linear Speed 5um/min~65 mm/min 1 um/min ~ 13 mm/min 5um/min~65mm/min Linear Resolution 5 um/min 1 um/min 5 um/min Linear Accuracy ≤±0.5% when ≥30% of pump stroke Linear Force ≥9 kg (20 lbs) ≥29 kg (64 lbs) ≥18 kg (40 lbs) Syringe Selection Built-in syringe branched, size and inner diameters Syringe Defined Can store four user-defined syringe inner diamerters Flowrate Calibration Improve flowrate accuracy Running Parameter Infusion volume, infusion time, etc Display Setting Display volume, flowrate or linear speed Power-off Memory Storing the running parameters automatically State Output OC gate signal to indicate start/stop and direction Control Input Falling edge or TTL signal to control Start/Stop Communication RS-485 Diemensin 280 L x 210 W x 140 mmH 280x250x140 mm Weight 3.6 kg 4.5 kg Power AC 90-260V/15W AC 90-260V/20W Syringe  Diameter (mm) LSP01-1A (uL/min~mL/min)  LSP01-2A (uL/min~mL/min)  LSP02-2A (uL/min~mL/min)  LSP04-1A (*/min)  10 uL 0.50 0.001-0.0128 0.0002-0.0026 0.0002-0.0026 0.001-0.0255 25 uL 0.80 0.0025-0.0327 0.0005-0.0065 0.0005-0.0065 0.0025-0.0653 50 uL 1.10 0.0048-0.0618 0.0095-0.0124 0.0095-0.0124 0.0048-0.1235 100 uL 1.60 0.0101-0.1307 0.002-0.026 0.002-0.026 0.0101-0.2614 250 uL 2.30 0.0208-0.2701 0.0042-0.054 0.0042-0.054 0.0208-0.5401 500 uL 3.25 0.0415-0.5392 0.0083-0.1078 0.0083-0.1078 0.0415-1.0784 1.0 mL 4.72 0.0875-1.1373 0.0175-0.2275 0.0175-0.2275 0.0875-2.2747 2.0 mL 9.00 0.3181-4.1351 0.0636-0.827 0.0636-0.827 0.3181-8.2702 5.0 mL 13.10 0.6739-8.7608 0.1348-1.7522 0.1348-1.7522 0.6739-17.522 10 mL 16.60 1.0821-14.068 0.2164-2.8135 0.2164-2.8135 1.0821-28.135 20 mL 19.00 1.4176-18.429 0.2835-3.6859 0.2835-3.6859 - 30 mL 23.00 2.0774-27.006 0.4155-5.4012 0.4155-5.4012 - 60 mL 29.14 3.3346-43.349 0.6669-8.6699 0.6669-8.6699 -

주문정보 Model Product code Channel Pusher Advance Linear Force LSP01-1A 050340A 1 0.156 um/step ≥9 kg (20 lbs) LSP01-2A 050341A 1 0.03125 um/step ≥9 kg (20 lbs) LSP02-2A 050347A 2 0.03125 um/step ≥29 kg (64 lbs) LSP04-1A 050345A 4 0.156 um/step ≥18 kg (40 lbs)

기술자료 LSP01(04)-1A Syringe Pump Calibration (Release Time：2017-01-06) The flowrate can be calibrated for more accurate dispense volume. 1. In parameters setting interface, press and turn RES to highlight the Calibration line. Press RES to enter calibration interface. 2. Testing time line is highlighted. Press RES to highlight the numerical value position. Turn RES to select the testing time. The testing time is from 0.5 minutes to 60 hours. Press RES to confirm. 3. Press Run/Pause key to start the testing. After testing, turn RES to highlight the testing volume line. Press RES to highlight the numerical value position. Enter the actual volume from the membrane keypad. Press RES to confirm. 4. After calibration, the linear speed of the Pusher Block changes to increase the accuracy of the dispense volume.   LSP01(04)-1A Syringe Pump Power Up  (Release Time：2017-01-06) This option is only applicable when no dispense volume is selected. When power returns after an interruption the pump can resume operation (select Run) or remain stopped (select Stop).   LSP01(04)-1A Single Channel Syringe Pump Flowrate setting (Release Time：2017-01-06) In parameters setting interface, turn and press RES to highlight the flowrate setting line. Press RES to make the numerical value position highlighted. Enter the flowrate required from the membrane keypad. Press RES to set flowrate unit. Turn RES to scroll through the list and press RES to select the unit required. Possible flowrate units are µl /h, µl/m, ml/h, ml/m. The highlighted display indicates that this parameter can be changed. Note: If the number entered exceeds the maximum flowrate possible then the pump prompts the maximum feasible flowrate at the Time position. To continue enter a flowrate smaller than the maximum.   LSP01(04)-1A Single Channel Syringe Pump Volume setting (Release Time：2017-01-06) In parameters setting interface, turn and press RES to highlight the volume setting line. Press RES to make the numerical value position highlighted. Enter targeted volume from the membrane keypad. Press RES to set volume unit. Turn RES to scroll through the list and press RES to select the unit required. Possible volume units are µl and ml, i.e. microliter and milliliter. The highlighted display indicates that this parameter can be changed. Note: When the volume setting is zero, the LCD will display the flowrate setting and the pump will run until manually stopped or a stall occurs.

귀하의 성공적인 연구개발의 동반자가 되겠습니다. ******************************************************************************************* (주)동방하이테크상사 http://www.allpump.co.kr 서울시 성동구 광나루로6길 35 성수이비즈센터 710호 T)02-457-6292 F)457-6293 dbht@allpump.co.kr ******************************************************************************************* 정량펌프, 정밀펌프, 고압펌프, 마이크로펌프, OEM 펌프, HPLC 펌프, 피스톤펌프, 주사기펌프, 실린지 펌프, 다이어프램펌프, 다이아프램펌프, 튜브펌프, 튜빙펌프, 호스펌프, 연동펌프, 기어펌프, 기아펌프 , 플런져펌프, 부란자펌프, 초정밀펌프, 초미세펌프, 초고압펌프, 밸브, 피팅, 튜빙, 아답터, 크로마토 그래피 제품, 연구실험기자재 등