본문 바로가기

정밀정량펌프/정밀주사기펌프

W0109 마이크로 주사기펌프 [W0109 Series Micro Syringe Pumps]

W0109  마이크로 주사기펌프

[W0109 Series Micro Syringe Pumps]

TJ-3A/W0109-1B 주입/흡입식 1-채널 마이크로 주사기펌프
TS-1B/W0109-1B 주입/흡입식 4-채널 마이크로 주사기펌프
TJP-3A/W0109-1B 프로그램어블 1-채널 마이크로 주사기펌프  

 

  개 요

TJ 주사기펌프는 설치와 작동이 간편한 높은 정밀도와 컴팩트한 사이즈의 1-채널 마이크로 주사기 펌프로서 마이크로리터(µL) 단위의 주사기를 장착할 수 있다. 정밀하고 높은재현성을 제공하며 넓은 이동속도 범위 (7.9 µm/min - 79.4 mm/min)는 다양한 요구조건을 만족시킬 수 있다. 수직 또는 수평으로 설치할 수 있는 구조는 현미조작기(micromanipulator) 또는 정위조작기 (stereotaxic) 등 다양한 생물학적인 연구에 적용할 수있다.
TS주사기펌프는 설치와 작동이 간편한 높은 정밀도와 컴팩트한 사이즈의 4-채널 마이크로 주사기 펌프로서, 밀리리터(mL) 표준 주사기를 장착할 수 있다. 정밀하고 높은재현성을 제공하며 넓은 이동속도 범위(7.9 µm/min - 79.4 mm/min)는 다양한 요구조건을 만족시킬 수 있다. 구동부(driver)와 제어부(controller)가 별도로 되어 있으며, 컴팩트한 구조로 되어 있다. 수직 또는 수평으로 설치할 수 있는 구조이기 때문에 현미조작기(micromanipulator) 또는 정위조작기 (stereotaxic) 등 다양한 생물학적인 연구에 적용할 수있다.
대형 LCD 화면에서 회전스위치와 멤브레인키패드를 이용하여 파라메터의 설정을 간편하게 할 수 있다

 

  특 징

Working Mode : Infusion or infusion/withdrawal
Parameters Setting : The parameters of each channel can be different.
Running Control : Each drive unit can be controlled separately, or four drive units can be controlled to run simultaneously or run at different time
Channel Copy : All drive units can be run according to the parameters of one drive units of them
Delaying Startup : Delaying startup time of each channel can be controlled separately
Memory Function : Select resume operation or remain stopped when power turns after an interruption
Block Protection : When one drive unit stops accidently, the system will warm and stop
Working Mode: Infusion
External Control : Start/stop input control signal which is pulse mode to switch the states of start and stop
Communication : Realize computer control through RS485 communication interface

 

 

Main Functions for Each Channel

Syringe Selection : The syringe can be selected in the manufacture table which includes manufacturer, material and size
User-Defined Glass Syringe : Save 4 inner diameter of user-defined glass syringe barrel
Parameters Setting : Set dispensing volume, infusion time, pause time and copy number
Display Mode Selection : Different parameters (column, flow rate, linear speed)can be selected in the main isplay inter face
Fast Forward & Fast Reverse : Infusion at the max. speed
Calibration : Acquire accurate volume through calibration

 

  규 격

  + 확대한 그림보기 ->

 TJ-3A/W0109-1B
 

 TS-1B/W0109-1B
 

 TJP-3A/W0109-1B
 

Working Mode

 Infusion/Withdrawal

Programmable

Channel

1

1~4

1

Syringe

5 uL ~ 1.0 mL

Stroke

90 mm

Pusher Advance

0.165 um/step

Linear Speed

7.94 um/min ~ 79.4 mm/min

Linear Resolution

7.94 um/min

Linear Accuracy

≤±0.5% when ≥30% of pump stroke

Linear Force

≥9 kg (20 lbs)

Syringe Selection

Built-in syringe branched, size and inner diameters

Syringe Defined

Can store four user-defined syringe inner diamerters

Flowrate Calibration

Improve flowrate accuracy

Running Parameter

Dispensin volume can be each channel,
all channel use the parameters of the specified channel

Start setting

Each drive unit can be started seperately,
simultanously or according to each delay time

Display Setting

Display volume, flowrate or linear speed

Power-off Memory

Select keeping previous state or resetting parameters when power on

Forwarard/backward

Infuse or withrawal liquid at full speed

State Output

2 OC gate signal to indicate start/stop and direction

Control Input

3 TTL signal to control start/stop, fast forwarard and fast backward

Communication

RS-485

Drive unit dimension

180 L x 46W x 78 mmH

Drive unit weight

0.6 kg

Controller dimension

170Lx108Wx65mmH

235Lx178Wx74mmH

170Lx108Wx65mmH

Controller weight

0.5 kg

0.8 kg

0.5 kg

Power

AC 90-260V/10W

AC 90-260V/40W

AC 90-260V/10W

Syringe

 Diameter (mm)

Flowrate (uL/min~mL/min) 

1 mL

4.72

0.139-1.39

2 mL

9.00

0.505-5.05

5 mL

13.10

1.07-10.7

10 mL

16.60

1.718-17.18

20 mL

19.00

2.251-22.51

30 mL

23.00

3.298-32.98

60 mL

29.14

5.295-52.95

 

  주문정보

Model

Product code

Channel

Pusher Advance

Linear Force

TJ-3A/W0109-1B

050312A/050302A

1

0.156 um/step

≥9 kg (20 lbs)

TS-1B/W0109-1B

050317B/050302A

1~4

TJP-3A/W0109-1B

050313A/050302A

1

 

  기술자료

Programmable Syringe Pump TJP-3A Flow Rates Calibration (Release Time:2017-01-20)

Flow calibration: Operator can get more accurate flow through calibratingthe diameter of syringe barrel.

In work interface and stop state, press RCS to enter menu setting interface,turn RCS to highlight “Calibration”, press RCS to enter next interface, the first line display the programmed flow in current mode; the second line displays the testing time whose range is from 1 to 60 minutes. The third line displays theoretical volume (the product of flow and testing time) or input measured volume directly. The fourth line displays the start/stop and direction state.

Calibration procedure: set testing time first, start pump. Pump automatically stop after the testing time is over, measure the liquid volume and input the measured volume, the calibration is over. If knew the measured volume in advance, operator can directly input the measured volume.

 

Programmable Syringe Pump TJP-3A External Control (Release Time:2017-01-20)

Control the Start/Stop of the pump by external signal, the trigger and gate modes are optional.

In work interface and stop state, press RCS to enter menu setting interface turn RCS to highlight “EXT control”, press RCS to enter external start/stop mode setting interface. Press RCS again to select “Trigger” or “Gate”, press RCS to save the setting.

 

TJ-3A 주사기펌프 유량교정

 

 

 

귀하의 성공적인 연구개발의 동반자가 되겠습니다.

*******************************************************************************************************************
(주)동방하이테크상사 
http://www.allpump.co.kr 
서울시 성동구 광나루로6길 35 성수이비즈센터 710호
T)02-457-6292  F)457-6293 
dbht@allpump.co.kr
*******************************************************************************************************************