본문 바로가기

정밀정량펌프/정밀주사기펌프

LSP 주입식 정밀 주사기펌프 [LSP Infusion Syringe Pumps]

LSP 주입식 정밀 주사기펌프

[LSP Infusion Syringe Pumps]

LSP01-1A 주입형 1-채널 주사기펌프
LSP01-2A 주입형 1-채널 미세주사기펌프
LSP02-2A 주입형 2-채널 미세주사기펌프
LSP04-1A 주입형 4-채널 주사기펌프

 

  개 요

LSP 주사기펌프는 설치와 작동이 간편하고 높은 정밀도와 신뢰성을 제공하는 실험실용 표준형 주사기펌프이다.
주입전용 제품으로 공급되며, 10 µL에서 60 mL 주사기를 장착할 수 있다.
대형 LCD 화면에서 회전스위치와 멤브레인키패드를 이용하여 파라메터의 설정을 간편하게 할 수 있다

 

  특 징

Syringe Selection : The syringe can be selected in the manufacturer table which includes manufacturer,
   material and size or input the inner diameter of the syringe barrel directly
Easy to operate: Combining big screen LCD display with rotary coded switch and membrane keypad makes
   the operation simple and prompt.
Working Mode: Infusion
Memory Function :
1. The parameters are saved in EEPROM.
   The parameters don't need to be reset when power returns after an interruption
2. In flow rate mode, the pump remains running or stop according to the setting parameters when power returns
    after an interruption
Protection Function : The pump will stall and give an alarm when the drive structure of the pump is blocked
Communication Function : Realize computer control through RS485 communication interface
Calibration Function : Acquire accurate volume through calibration: Input/output control
Syringe Protection : Adjust syringe rest to prevent syringe from damaging

 

  규 격

 + 확대한 그림보기->

LSP01-1A

LSP01-2A

LSP02-2A

LSP04-1A

Working Mode

Infusion

Channel

1

2

4

Syringe

10 uL ~ 60 mL

10 uL ~ 10 mL

Stroke

140 mm

Pusher Advance

0.156 um/step

0.03125 um/step

0.156 um/step

Linear Speed

5um/min~65 mm/min

1 um/min ~ 13 mm/min

5um/min~65mm/min

Linear Resolution

5 um/min

1 um/min

5 um/min

Linear Accuracy

≤±0.5% when ≥30% of pump stroke

Linear Force

≥9 kg (20 lbs)

29 kg (64 lbs)

18 kg (40 lbs)

Syringe Selection

Built-in syringe branched, size and inner diameters

Syringe Defined

Can store four user-defined syringe inner diamerters

Flowrate Calibration

Improve flowrate accuracy

Running Parameter

Infusion volume, infusion time, etc

Display Setting

Display volume, flowrate or linear speed

Power-off Memory

Storing the running parameters automatically

State Output

OC gate signal to indicate start/stop and direction

Control Input

Falling edge or TTL signal to control Start/Stop

Communication

RS-485

Diemensin

280 L x 210 W x 140 mmH

280x250x140 mm

Weight

3.6 kg

4.5 kg

Power

AC 90-260V/15W

AC 90-260V/20W

Syringe

 Diameter
(mm)

LSP01-1A
(uL/min~mL/min) 

LSP01-2A
(uL/min~mL/min) 

LSP02-2A
(uL/min~mL/min) 

LSP04-1A
(*/min) 

10 uL

0.50

0.001-0.0128

0.0002-0.0026

0.0002-0.0026

0.001-0.0255

25 uL

0.80

0.0025-0.0327

0.0005-0.0065

0.0005-0.0065

0.0025-0.0653

50 uL

1.10

0.0048-0.0618

0.0095-0.0124

0.0095-0.0124

0.0048-0.1235

100 uL

1.60

0.0101-0.1307

0.002-0.026

0.002-0.026

0.0101-0.2614

250 uL

2.30

0.0208-0.2701

0.0042-0.054

0.0042-0.054

0.0208-0.5401

500 uL

3.25

0.0415-0.5392

0.0083-0.1078

0.0083-0.1078

0.0415-1.0784

1.0 mL

4.72

0.0875-1.1373

0.0175-0.2275

0.0175-0.2275

0.0875-2.2747

2.0 mL

9.00

0.3181-4.1351

0.0636-0.827

0.0636-0.827

0.3181-8.2702

5.0 mL

13.10

0.6739-8.7608

0.1348-1.7522

0.1348-1.7522

0.6739-17.522

10 mL

16.60

1.0821-14.068

0.2164-2.8135

0.2164-2.8135

1.0821-28.135

20 mL

19.00

1.4176-18.429

0.2835-3.6859

0.2835-3.6859

-

30 mL

23.00

2.0774-27.006

0.4155-5.4012

0.4155-5.4012

-

60 mL

29.14

3.3346-43.349

0.6669-8.6699

0.6669-8.6699

-

 

  주문정보

Model

Product code

Channel

Pusher Advance

Linear Force

LSP01-1A

050340A

1

0.156 um/step

≥9 kg (20 lbs)

LSP01-2A

050341A

1

0.03125 um/step

≥9 kg (20 lbs)

LSP02-2A

050347A

2

0.03125 um/step

29 kg (64 lbs)

LSP04-1A

050345A

4

0.156 um/step

18 kg (40 lbs)

 

  기술자료

LSP01(04)-1A Syringe Pump Calibration (Release Time:2017-01-06)

The flowrate can be calibrated for more accurate dispense volume.

1. In parameters setting interface, press and turn RES to highlight the Calibration line. Press RES to enter calibration interface.
2. Testing time line is highlighted. Press RES to highlight the numerical value position. Turn RES to select the testing time. The testing time is from 0.5 minutes to 60 hours. Press RES to confirm.
3. Press Run/Pause key to start the testing. After testing, turn RES to highlight the testing volume line. Press RES to highlight the numerical value position. Enter the actual volume from the membrane keypad. Press RES to confirm.
4. After calibration, the linear speed of the Pusher Block changes to increase the accuracy of the dispense volume.

 

LSP01(04)-1A Syringe Pump Power Up  (Release Time:2017-01-06)

This option is only applicable when no dispense volume is selected. When power returns after an interruption the pump can resume operation (select Run) or remain stopped (select Stop).

 

LSP01(04)-1A Single Channel Syringe Pump Flowrate setting (Release Time:2017-01-06)

In parameters setting interface, turn and press RES to highlight the flowrate setting line. Press RES to make the numerical value position highlighted. Enter the flowrate required from the membrane keypad. Press RES to set flowrate unit. Turn RES to scroll through the list and press RES to select the unit required. Possible flowrate units are µl /h, µl/m, ml/h, ml/m. The highlighted display indicates that this parameter can be changed.

Note: If the number entered exceeds the maximum flowrate possible then the pump prompts the maximum feasible flowrate at the Time position. To continue enter a flowrate smaller than the maximum.

 

LSP01(04)-1A Single Channel Syringe Pump Volume setting (Release Time:2017-01-06)

In parameters setting interface, turn and press RES to highlight the volume setting line. Press RES to make the numerical value position highlighted. Enter targeted volume from the membrane keypad. Press RES to set volume unit. Turn RES to scroll through the list and press RES to select the unit required. Possible volume units are µl and ml, i.e. microliter and milliliter. The highlighted display indicates that this parameter can be changed.

Note: When the volume setting is zero, the LCD will display the flowrate setting and the pump will run until manually stopped or a stall occurs.

 

 

귀하의 성공적인 연구개발의 동반자가 되겠습니다.

*******************************************************************************************************************
(주)동방하이테크상사 
http://www.allpump.co.kr 
서울시 성동구 광나루로6길 35 성수이비즈센터 710호
T)02-457-6292  F)457-6293 
dbht@allpump.co.kr
*******************************************************************************************************************