T60/WX10 속도조절형 OEM 튜브연동펌프 [T60/WX10 OEM Peristaltic Pump]

T60/WX10 속도조절형 OEM 튜브연동펌프 [T60/WX10 OEM Peristaltic Pump] 스테퍼모터, BCD 스위치 회전속도 : ≤60 rpm 유량범위 : ≤24 mL/min 펌프헤드 : WX10

특 징  WX10-14 펌프헤드, 멀티-제어 모드 채택 정밀 유체장비 및 기기 제작에 이상적인 OEM 튜브연동펌프 밑판고정형(soleplate) 또는 벽면고정형(panel installation) T60/WX10 without Drive T60/WX10 with Drive

규 격 Speed : ≤60 rpm Speed resolution : 0.1 rpm Max. flow rate : ≤24 mL/min Tubing : ID≤3.17mm, wall thickness; 0.8mm-1.0mm Direction control : External switch signal. CW when switch is open, CCW when switch is closed  Start/stop control : External switch signal. Pump run when switch is open, stop when switch is closed  BCD dial switch speed control : BCD position 1-F corresponding to 1,3,5,8,10,15,20,25,30,35,40,45,50,55,60 rpm External speed control : 4~20 mA, 0~5 V, 0~10 V, 0~10 kHz Communacation interface : Available for pump with RS485 Pump ID range is 1-30, 31 is broadcast address Bit rate; 1200 or 9600 bps Power supply : DC11.4~25.2V Power consumption : 10W Operating condition : Temperature; 0~40℃     Relative humidity; <80% Dimensions : 107 L x 60 W x 80 mmH Step motor specification Step angle 1.8° Phase 2 Phase voltage 9V Phase current 0.6A Resistance 15Ω±10% Inductance 24mH±20% Step motor port Line color Definition Red A Green A Yellow B Blue B

주문정보 Drive Pump head External control Product code T60-S1 WX10-14-A 4-20 mA 05.57.01A T60-S2 0-5 V 05.57.11A T60-S3 0-10 V 05.57.21A T60-S4 0-10 kHz 05.57.31A T60-S50 RS-485C 05.57.41A WX10-14

기술자료 WX10-14 펌프헤드 튜브장착 4-롤러와 8-롤러 WX10-14 펌프헤드의 맥동비교

귀하의 성공적인 연구개발의 동반자가 되겠습니다.

*******************************************************************************************************************
(주)동방하이테크상사 
http://www.allpump.co.kr 
서울시 성동구 광나루로6길 35 성수이비즈센터 710호
T)02-457-6292  F)457-6293  dbht@allpump.co.kr
*******************************************************************************************************************