튜브연동펌프 부속품 [Peristaltic Pump Accessories]

튜브연동펌프 부속품 [Peristaltic Pump Accessories] Dispensing Controller Foot Switch External Control Module

Dispensing Controller Dispensing time : 0-99.99S Pause time : 0-99.99S Time resolution : 0.01S Work mode : Single or multiple Internal count range : 0-999, count up or count down External count range : 999999，0 means unlimited cycle External Start/Stop : Open circuit Memory function : Repower the pump, user can choose whether to continue in accordance with the state before the power-down Power supply : AC 220V/5W Type Product code Function FK-1C 05.49.25A Dispensing controller can be equipped with many peristaltic pumps, gear pumps to realize dispensing automatically.

Foot Switch Type Product code Connector Applicable Function JK-1 05.49.20A DB-9 Peristaltic Pumps Gated: Pump stops when it is powered on. Pump runs when press down the footswitch; and pump stops when release the footswitch. Trigger: Pump stops when it is powered on. Pump runs when footswitch is pressed once, and pump will stop when footswitch is pressed again. JK-2 05.49.20B DB-9 Dispensing Controller Trigger: Pump stops when it is powered on. Pump runs when footswitch is pressed once, and pump will stop when footswitch is pressed again. JK-3 05.49.20C DB-15 Peristaltic Pumps Gated: Pump stops when it is powered on. Pump runs when press down the footswitch; and pump stops when release the footswitch. JK-4 05.49.20D DB-9 LSP Syringe Pumps Gated: Pump stops when it is powered on. Pump runs when press down the footswitch; and pump stops when release the footswitch. Trigger: Pump stops when it is powered on. Pump runs when footswitch is pressed once, and pump will stop when footswitch is pressed again. JK-5 05.49.20E DB-15 TJ Syringe Pumps Trigger: Pump stops when it is powered on. Pump runs when footswitch is pressed once (press down and release), and pump will stop when footswitch is pressed again.  JK-6 05.49.20F None TS Syringe Pumps Trigger: Pump stops when it is powered on. Pump runs when footswitch is pressed once (press down and release), and pump will stop when footswitch is pressed again.  JK-8 05.49.20H 9-pin YT600-1J   JK-9 05.49.20I 9-pin WT600-3J   JK-10 05.49.20J 9-pin WT600-4F   JK-11 05.49.20K DB-15 Peristaltic Pumps   JK-12 05.49.20L DB-9 Peristaltic Pumps   JK-13 05.49.20M None FK-100Z   JK-14 05.49.20N BNC LLP01-100

External Control Interface Type Product code Connector BQ50-1J, WT3000-1JA, BT100-2J, BT100-1F, WT3000-1FA, BT300-2J, BT300-1F, WT3000-1JB, BT600-2J, WT600-2J, WT3000-1FB, WT600-1F 0~5 V 05.49.31A DB-15 0~10 V 05.49.31B DB-15 4~20 mA 05.49.31C DB-15 0~10 kHz 05.49.31D DB-15 RS-485 05.49.31E DB-15 WK-01 - - Change (4-20mA, 0-5V, 0-10V) on the basis of standard analog external control module on the increase in internal and external control conversion. Wk-02 - - Switching control start and stop supporting OEM100J-75 WK-03 - - Switching control start and stop supporting OEM100J-75 WK-04 - - Switching control peristaltic pump (except aeronautical product plug interfaces) start and stop, stop short, disconnected operation WK-05 - - Switching control peristaltic pump WT600-3J, WT600-4F start and stop WK-06 - - Switching control start and stop, fault alarm output by the extraction module WK-07 - - WK-04 module controls the start and stop logic is inverted; short run, stop off WK-08 - - External control only controls the start and stop buttons control the speed of the internal control, 5V stopped, suspended the operation according to the original state WK-09 - - External control only controls the start and stop buttons control the speed of the internal control, 24V stopped, suspended the operation according to the original state WK-10 - - External control switch start and stop and direction control, speed control button internal, supporting BT100-2J-12 & YZ1515X WK-11 - - Increase external control switch function on the basis of external control 0-10V WK-12 - - And supporting the use of BT100-2J-18, DB15 connected to drive external control interface, DB9 pin 2 Take 0-10V negative, positive needle 5 then 0-10V WK-17 - - Adaptation LSP02-1B-1, by switching control and direction of the pump start and stop. WK-18 - - Supporting BT100-2J-21 WK-19 - - Supporting the use TJ-3A-5, switch control, external control start and stop and direction control

기술자료 BT100-2J 펌프 외부제어 BT600-2J 펌프 외부제어(0-5V) BT600-2J 펌프 PC제어 LEAD-2 펌프 외부제어

귀하의 성공적인 연구개발의 동반자가 되겠습니다.

*******************************************************************************************************************
(주)동방하이테크상사 
http://www.allpump.co.kr 
서울시 성동구 광나루로6길 35 성수이비즈센터 710호
T)02-457-6292  F)457-6293  dbht@allpump.co.kr
*******************************************************************************************************************