튜브연동펌프 부속품 [Peristaltic Pump Accessories]

펌프전문가들이 극찬한 Longer Precision Pump Co.,Ltd. 공식대리점

#정식수입 #공식인증 #Longer제휴 #Longer펌프견적 #Longer펌프문의 #펌프견적문의 #동방하이테크상사

	튜브연동펌프 부속품  [Peristaltic Pump Accessories]
	》 Dispensing Controller 》 Foot Switch 》 External Control Module

◈Dispensing Controller

Dispensing time	0-99.99S
Pause time	0-99.99S
Time resolution	0.01S
Work mode	Single or multiple
Internal count range	0-999, count up or count down
External count range	999999，0 means unlimited cycle
External Start/Stop	Open circuit
Memory function	Repower the pump, user can choose whether to continue in accordance with the state before the power-down
Power supply	AC 220V/5W

Type	Product code	Function
FK-1C	05.49.25A	Dispensing controller can be equipped with many peristaltic pumps, gear pumps to realize dispensing automatically.

◈Foot Switch

Type	Product code	Connector	Applicable	Function
JK-1	05.49.20A	DB-9	Peristaltic Pumps	Gated: Pump stops when it is powered on. Pump runs when press down the footswitch; and pump stops when release the footswitch. Trigger: Pump stops when it is powered on. Pump runs when footswitch is pressed once, and pump will stop when footswitch is pressed again.
JK-2	05.49.20B	DB-9	Dispensing Controller	Trigger: Pump stops when it is powered on. Pump runs when footswitch is pressed once, and pump will stop when footswitch is pressed again.
JK-3	05.49.20C	DB-15	Peristaltic Pumps	Gated: Pump stops when it is powered on. Pump runs when press down the footswitch; and pump stops when release the footswitch.
JK-4	05.49.20D	DB-9	LSP Syringe Pumps	Gated: Pump stops when it is powered on. Pump runs when press down the footswitch; and pump stops when release the footswitch. Trigger: Pump stops when it is powered on. Pump runs when footswitch is pressed once, and pump will stop when footswitch is pressed again.
JK-5	05.49.20E	DB-15	TJ Syringe Pumps	Trigger: Pump stops when it is powered on. Pump runs when footswitch is pressed once (press down and release), and pump will stop when footswitch is pressed again.
JK-6	05.49.20F	None	TS Syringe Pumps	Trigger: Pump stops when it is powered on. Pump runs when footswitch is pressed once (press down and release), and pump will stop when footswitch is pressed again.
JK-8	05.49.20H	9-pin	YT600-1J
JK-9	05.49.20I	9-pin	WT600-3J
JK-10	05.49.20J	9-pin	WT600-4F
JK-11	05.49.20K	DB-15	Peristaltic Pumps
JK-12	05.49.20L	DB-9	Peristaltic Pumps
JK-13	05.49.20M	None	FK-100Z
JK-14	05.49.20N	BNC	LLP01-100

◈External Control Interface

Type	Product code	Connector	BQ50-1J, WT3000-1JA, BT100-2J, BT100-1F, WT3000-1FA, BT300-2J, BT300-1F, WT3000-1JB, BT600-2J, WT600-2J, WT3000-1FB, WT600-1F
0~5 V	05.49.31A	DB-15
0~10 V	05.49.31B	DB-15
4~20 mA	05.49.31C	DB-15
0~10 kHz	05.49.31D	DB-15
RS-485	05.49.31E	DB-15
WK-01	-	-	Change (4-20mA, 0-5V, 0-10V) on the basis of standard analog external control module on the increase in internal and external control conversion.
Wk-02	-	-	Switching control start and stop supporting OEM100J-75
WK-03	-	-	Switching control start and stop supporting OEM100J-75
WK-04	-	-	Switching control peristaltic pump (except aeronautical product plug interfaces) start and stop, stop short, disconnected operation
WK-05	-	-	Switching control peristaltic pump WT600-3J, WT600-4F start and stop
WK-06	-	-	Switching control start and stop, fault alarm output by the extraction module
WK-07	-	-	WK-04 module controls the start and stop logic is inverted; short run, stop off
WK-08	-	-	External control only controls the start and stop buttons control the speed of the internal control, 5V stopped, suspended the operation according to the original state
WK-09	-	-	External control only controls the start and stop buttons control the speed of the internal control, 24V stopped, suspended the operation according to the original state
WK-10	-	-	External control switch start and stop and direction control, speed control button internal, supporting BT100-2J-12 & YZ1515X
WK-11	-	-	Increase external control switch function on the basis of external control 0-10V
WK-12	-	-	And supporting the use of BT100-2J-18, DB15 connected to drive external control interface, DB9 pin 2 Take 0-10V negative, positive needle 5 then 0-10V
WK-17	-	-	Adaptation LSP02-1B-1, by switching control and direction of the pump start and stop.
WK-18	-	-	Supporting BT100-2J-21
WK-19	-	-	Supporting the use TJ-3A-5, switch control, external control start and stop and direction control

◈기술자료

BT100-2J 펌프 외부제어	BT600-2J 펌프 외부제어(0-5V)
BT600-2J 펌프 PC제어	LEAD-2 펌프 외부제어

귀하의 성공적인 연구개발의 동반자가 되겠습니다.

***************************************************************************************
동방하이테크상사 
http://www.allpump.co.kr 
서울시 성동구 광나루로6길 35, 성수이비즈센터 710호
T)02-457-6292  F)457-6293  dbht@allpump.co.kr
***************************************************************************************
정량펌프, 정밀펌프, 고압펌프, 마이크로펌프, OEM 펌프, HPLC 펌프, 피스톤펌프, 주사기펌프, 실린지펌프, 다이어프램펌프, 다이아프램펌프, 튜브펌프, 튜빙펌프, 호스펌프, 연동펌프, 기어펌프, 기아펌프, 플런져펌프, 부란자펌프, 초정밀펌프, 초미세펌프, 초고압펌프, 밸브, 피팅, 튜빙, 아답터, 크로마토그래피 제품, 연구실험기자재 등

동방하이테크를 찾아주셔서 감사합니다.