W0109 마이크로 주사기펌프[W0109 Series Micro Syringe Pumps]

W0109  마이크로 주사기펌프 [W0109 Series Micro Syringe Pumps] TJ-3A/W0109-1B 주입/흡입식 1-채널 마이크로 주사기펌프 TS-1B/W0109-1B 주입/흡입식 4-채널 마이크로 주사기펌프 TJP-3A/W0109-1B 프로그램어블 1-채널 마이크로 주사기펌프

개 요 TJ 주사기펌프는 설치와 작동이 간편한 높은 정밀도와 컴팩트한 사이즈의 1-채널 마이크로 주사기 펌프로서 마이크로리터(µL) 단위의 주사기를 장착할 수 있다. 정밀하고 높은재현성을 제공하며 넓은 이동속도 범위 (7.9 µm/min - 79.4 mm/min)는 다양한 요구조건을 만족시킬 수 있다. 수직 또는 수평으로 설치할 수 있는 구조는 현미조작기(micromanipulator) 또는 정위조작기 (stereotaxic) 등 다양한 생물학적인 연구에 적용할 수있다. TS주사기펌프는 설치와 작동이 간편한 높은 정밀도와 컴팩트한 사이즈의 4-채널 마이크로 주사기 펌프로서, 밀리리터(mL) 표준 주사기를 장착할 수 있다. 정밀하고 높은재현성을 제공하며 넓은 이동속도 범위(7.9 µm/min - 79.4 mm/min)는 다양한 요구조건을 만족시킬 수 있다. 구동부(driver)와 제어부(controller)가 별도로 되어 있으며, 컴팩트한 구조로 되어 있다. 수직 또는 수평으로 설치할 수 있는 구조이기 때문에 현미조작기(micromanipulator) 또는 정위조작기 (stereotaxic) 등 다양한 생물학적인 연구에 적용할 수있다. 대형 LCD 화면에서 회전스위치와 멤브레인키패드를 이용하여 파라메터의 설정을 간편하게 할 수 있다

특 징 Working Mode : Infusion or infusion/withdrawal Parameters Setting : The parameters of each channel can be different. Running Control : Each drive unit can be controlled separately, or four drive units can be controlled to run simultaneously or run at different time Channel Copy : All drive units can be run according to the parameters of one drive units of them Delaying Startup : Delaying startup time of each channel can be controlled separately Memory Function : Select resume operation or remain stopped when power turns after an interruption Block Protection : When one drive unit stops accidently, the system will warm and stop Working Mode: Infusion External Control : Start/stop input control signal which is pulse mode to switch the states of start and stop Communication : Realize computer control through RS485 communication interface   　 Main Functions for Each Channel Syringe Selection : The syringe can be selected in the manufacture table which includes manufacturer, material and size User-Defined Glass Syringe : Save 4 inner diameter of user-defined glass syringe barrel Parameters Setting : Set dispensing volume, infusion time, pause time and copy number Display Mode Selection : Different parameters (column, flow rate, linear speed)can be selected in the main isplay inter face Fast Forward & Fast Reverse : Infusion at the max. speed Calibration : Acquire accurate volume through calibration

규 격   + 확대한 그림보기 ->  TJ-3A/W0109-1B    TS-1B/W0109-1B    TJP-3A/W0109-1B   Working Mode  Infusion/Withdrawal Programmable Channel 1 1~4 1 Syringe 5 uL ~ 1.0 mL Stroke 90 mm Pusher Advance 0.165 um/step Linear Speed 7.94 um/min ~ 79.4 mm/min Linear Resolution 7.94 um/min Linear Accuracy ≤±0.5% when ≥30% of pump stroke Linear Force ≥9 kg (20 lbs) Syringe Selection Built-in syringe branched, size and inner diameters Syringe Defined Can store four user-defined syringe inner diamerters Flowrate Calibration Improve flowrate accuracy Running Parameter Dispensin volume can be each channel, all channel use the parameters of the specified channel Start setting Each drive unit can be started seperately, simultanously or according to each delay time Display Setting Display volume, flowrate or linear speed Power-off Memory Select keeping previous state or resetting parameters when power on Forwarard/backward Infuse or withrawal liquid at full speed State Output 2 OC gate signal to indicate start/stop and direction Control Input 3 TTL signal to control start/stop, fast forwarard and fast backward Communication RS-485 Drive unit dimension 180 L x 46W x 78 mmH Drive unit weight 0.6 kg Controller dimension 170Lx108Wx65mmH 235Lx178Wx74mmH 170Lx108Wx65mmH Controller weight 0.5 kg 0.8 kg 0.5 kg Power AC 90-260V/10W AC 90-260V/40W AC 90-260V/10W Syringe  Diameter (mm) Flowrate (uL/min~mL/min)  1 mL 4.72 0.139-1.39 2 mL 9.00 0.505-5.05 5 mL 13.10 1.07-10.7 10 mL 16.60 1.718-17.18 20 mL 19.00 2.251-22.51 30 mL 23.00 3.298-32.98 60 mL 29.14 5.295-52.95

주문정보 Model Product code Channel Pusher Advance Linear Force TJ-3A/W0109-1B 050312A/050302A 1 0.156 um/step ≥9 kg (20 lbs) TS-1B/W0109-1B 050317B/050302A 1~4 TJP-3A/W0109-1B 050313A/050302A 1

기술자료 Programmable Syringe Pump TJP-3A Flow Rates Calibration (Release Time：2017-01-20) Flow calibration: Operator can get more accurate flow through calibratingthe diameter of syringe barrel. In work interface and stop state, press RCS to enter menu setting interface,turn RCS to highlight “Calibration”, press RCS to enter next interface, the first line display the programmed flow in current mode; the second line displays the testing time whose range is from 1 to 60 minutes. The third line displays theoretical volume (the product of flow and testing time) or input measured volume directly. The fourth line displays the start/stop and direction state. Calibration procedure: set testing time first, start pump. Pump automatically stop after the testing time is over, measure the liquid volume and input the measured volume, the calibration is over. If knew the measured volume in advance, operator can directly input the measured volume.   Programmable Syringe Pump TJP-3A External Control (Release Time：2017-01-20) Control the Start/Stop of the pump by external signal, the trigger and gate modes are optional. In work interface and stop state, press RCS to enter menu setting interface turn RCS to highlight “EXT control”, press RCS to enter external start/stop mode setting interface. Press RCS again to select “Trigger” or “Gate”, press RCS to save the setting.   TJ-3A 주사기펌프 유량교정

귀하의 성공적인 연구개발의 동반자가 되겠습니다.

******************************************************************************************************************* (주)동방하이테크상사   http://www.allpump.co.kr   서울시 성동구 광나루로6길 35 성수이비즈센터 710호 T)02-457-6292  F)457-6293  dbht@allpump.co.kr ******************************************************************************************************************* 정량펌프, 정밀펌프, 고압펌프, 마이크로펌프, OEM 펌프, HPLC 펌프, 피스톤펌프, 주사기펌프, 실린지펌프, 다이어프램펌프, 다이아프램펌프, 튜브펌프, 튜빙펌프, 호스펌프, 연동펌프, 기어펌프, 기아펌프, 플런져펌프, 부란자펌프, 초정밀펌프, 초미세펌프, 초고압펌프, 밸브, 피팅, 튜빙, 아답터, 크로마토그래피 제품, 연구실험기자재 등