본문 바로가기

브랜드별펌프/LONGER

[LONGER] 튜브연동펌프 부속품

​​​​
LONGER
튜브연동펌프 부속품
[Peristaltic Pump Accessories]
Dispensing Controller
Foot Switch
External Control Module

주문정보

Dispensing Controller

Dispensing time
0-99.99S
Pause time
0-99.99S
Time resolution
0.01S
Work mode
Single or multiple
Internal count range
0-999, count up or count down
External count range
999999,0 means unlimited cycle
External Start/Stop
Open circuit
Memory function
Repower the pump, user can choose whether to continue in accordance with the state before the power-down
Power supply
AC 220V/5W
Type
Product code
Function
FK-1C
05.49.25A
Dispensing controller can be equipped with many peristaltic pumps, gear pumps to realize dispensing automatically.
Foot Switch

Type
Product code
Connector
Applicable
Function
JK-1
05.49.20A
DB-9
Peristaltic
Pumps
Gated: Pump stops when it is powered on. Pump runs when press down the footswitch; and pump stops when release the footswitch.
Trigger: Pump stops when it is powered on. Pump runs when footswitch is pressed once, and pump will stop when footswitch is pressed again.
JK-2
05.49.20B
DB-9
Dispensing
Controller
Trigger: Pump stops when it is powered on. Pump runs when footswitch is pressed once, and pump will stop when footswitch is pressed again.
JK-3
05.49.20C
DB-15
Peristaltic
Pumps
Gated: Pump stops when it is powered on. Pump runs when press down the footswitch; and pump stops when release the footswitch.
JK-4
05.49.20D
DB-9
LSP Syringe
Pumps
Gated: Pump stops when it is powered on. Pump runs when press down the footswitch; and pump stops when release the footswitch.
Trigger: Pump stops when it is powered on. Pump runs when footswitch is pressed once, and pump will stop when footswitch is pressed again.
JK-5
05.49.20E
DB-15
TJ Syringe
Pumps
Trigger: Pump stops when it is powered on. Pump runs when footswitch is pressed once (press down and release), and pump will stop when footswitch is pressed again.
JK-6
05.49.20F
None
TS Syringe
Pumps
Trigger: Pump stops when it is powered on. Pump runs when footswitch is pressed once (press down and release), and pump will stop when footswitch is pressed again.
JK-8
05.49.20H
9-pin
YT600-1J
JK-9
05.49.20I
9-pin
WT600-3J
JK-10
05.49.20J
9-pin
WT600-4F
JK-11
05.49.20K
DB-15
Peristaltic
Pumps
JK-12
05.49.20L
DB-9
Peristaltic
Pumps
JK-13
05.49.20M
None
FK-100Z
JK-14
05.49.20N
BNC
LLP01-100
External Control Interface

Type
Product code
Connector
0~5 V
05.49.31A
DB-15
BQ50-1J, WT3000-1JA, BT100-2J, BT100-1F, WT3000-1FA, BT300-2J, BT300-1F, WT3000-1JB, BT600-2J, WT600-2J, WT3000-1FB, WT600-1F
0~10 V
05.49.31B
DB-15
4~20 mA
05.49.31C
DB-15
0~10 kHz
05.49.31D
DB-15
RS-485
05.49.31E
DB-15
WK-01
-
-
Change (4-20mA, 0-5V, 0-10V) on the basis of standard analog external control module on the increase in internal and external control conversion.
Wk-02
-
-
Switching control start and stop supporting OEM100J-75
WK-03
-
-
Switching control start and stop supporting OEM100J-75
WK-04
-
-
Switching control peristaltic pump (except aeronautical product plug interfaces) start and stop, stop short, disconnected operation
WK-05
-
-
Switching control peristaltic pump WT600-3J, WT600-4F start and stop
WK-06
-
-
Switching control start and stop, fault alarm output by the extraction module
WK-07
-
-
WK-04 module controls the start and stop logic is inverted; short run, stop off
WK-08
-
-
External control only controls the start and stop buttons control the speed of the internal control, 5V stopped, suspended the operation according to the original state
WK-09
-
-
External control only controls the start and stop buttons control the speed of the internal control, 24V stopped, suspended the operation according to the original state
WK-10
-
-
External control switch start and stop and direction control, speed control button internal, supporting BT100-2J-12 & YZ1515X
WK-11
-
-
Increase external control switch function on the basis of external control 0-10V
WK-12
-
-
And supporting the use of BT100-2J-18, DB15 connected to drive external control interface, DB9 pin 2 Take 0-10V negative, positive needle 5 then 0-10V
WK-17
-
-
Adaptation LSP02-1B-1, by switching control and direction of the pump start and stop.
WK-18
-
-
Supporting BT100-2J-21
WK-19
-
-
Supporting the use TJ-3A-5, switch control, external control start and stop and direction control

귀하의 성공적인 연구개발의 동반자가 되겠습니다.

***************************************************************************************

동방하이테크상사

http://www.allpump.co.kr

서울시 성동구 광나루로6길 35, 성수이비즈센터 710호

T)02-457-6292 F)457-6293 dbht@allpump.co.kr

***************************************************************************************

정량펌프, 정밀펌프, 고압펌프, 마이크로펌프, OEM 펌프, HPLC 펌프, 피스톤펌프, 주사기펌프, 실린지펌프, 다이어프램펌프, 다이아프램펌프, 튜브펌프, 튜빙펌프, 호스펌프, 연동펌프, 기어펌프, 기아펌프, 플런져펌프, 부란자펌프, 초정밀펌프, 초미세펌프, 초고압펌프, 밸브, 피팅, 튜빙, 아답터, 크로마토그래피 제품, 연구실험기자재 등